#include "include.h" #if HLW_UI #include "hlw_func.h" #endif xcfg_cb_t xcfg_cb; sys_cb_t sys_cb AT(.buf.bsp.sys_cb); volatile int micl2gnd_flag; volatile u32 ticks_50ms; uint8_t cfg_spiflash_speed_up_en = FLASH_SPEED_UP_EN; //SPI FLASH提速。部份FLASH不支持提速 uint8_t cfg_pmu_vddio_lp_enable = SYS_VDDIO_LP_EN; void sd_detect(void); void tbox_uart_isr(void); void testbox_init(void); bool exspiflash_init(void); void ledseg_6c6s_clr(void); u8 getcfg_buck_mode_en(void); #if BT_PWRKEY_5S_DISCOVER_EN AT(.com_text.detect) void pwrkey_5s_on_check(void) { if (!xcfg_cb.bt_pwrkey_nsec_discover) { return; } if (sys_cb.pwrkey_5s_check) { if (PWRKEY_IS_PRESS() || TKEY_IS_PRESS()) { if (tick_check_expire(sys_cb.ms_ticks, 1000 * xcfg_cb.bt_pwrkey_nsec_discover)) { sys_cb.pwrkey_5s_flag = 1; sys_cb.pwrkey_5s_check = 0; } } else { sys_cb.pwrkey_5s_check = 0; } } } #endif // BT_PWRKEY_5S_DISCOVER_EN #if PWRKEY_2_HW_PWRON //软开机模拟硬开关，松开PWRKEY就关机。 AT(.com_text.detect) void pwrkey_2_hw_pwroff_detect(void) { static int off_cnt = 0; if (!PWRKEY_2_HW_PWRON) { return; } if (PWRKEY_IS_PRESS()) { off_cnt = 0; } else { if (off_cnt < 10) { off_cnt++; } else if (off_cnt == 10) { //pwrkey已松开，需要关机 off_cnt = 20; sys_cb.pwrdwn_hw_flag = 1; sys_cb.poweron_flag = 0; } } } #endif // PWRKEY_2_HW_PWRON #if USER_NTC AT(.com_text.ntc) u8 sys_ntc_check(void) { if (!xcfg_cb.ntc_en) { return 0; } #if HLW_UI hlw_func_ntc_handle_process(); #else static int n_cnt = 0; if (xcfg_cb.ntc_en) { if (saradc_get_value8(ADCCH_NTC) <= xcfg_cb.ntc_thd_val) { if (n_cnt >= 20) { sys_cb.ntc_2_pwrdwn_flag = 1; return 1; } else { n_cnt++; } } else { n_cnt = 0; } } #endif return 0; } #endif //timer tick interrupt(1ms) AT(.com_text.timer) void usr_tmr1ms_isr(void) { #if (GUI_SELECT & DISPLAY_LEDSEG) gui_scan(); //7P屏按COM扫描时，1ms间隔 #endif #if LED_DISP_EN port_2led_scan(); #endif // LED_DISP_EN plugin_tmr1ms_isr(); #if USER_KEY_KNOB2_EN bsp_key_scan(); #endif led_scan(); } //timer tick interrupt(5ms) AT(.com_text.timer) void usr_tmr5ms_thread(void) { tmr5ms_cnt++; //5ms timer process dac_fade_process(); #if !USER_KEY_KNOB2_EN bsp_key_scan(); #endif #if PWRKEY_2_HW_PWRON pwrkey_2_hw_pwroff_detect(); #endif #if (CHARGE_BOX_TYPE == CBOX_SSW) charge_box_heart_beat_ack(); #endif plugin_tmr5ms_isr(); #if MUSIC_SDCARD_EN sd_detect(); #endif // MUSIC_SDCARD_EN #if USER_NTC #if !HLW_UI sys_ntc_check(); #endif #endif #if USB_SUPPORT_EN usb_detect(); #endif // USB_SUPPORT_EN #if LINEIN_DETECT_EN linein_detect(); #endif // LINEIN_DETECT_EN #if USER_INEAR_DETECT_EN earin_detect(); #endif #if WARNING_WSBC_EN warning_dec_check_kick(); #endif //20ms timer process if ((tmr5ms_cnt % 4) == 0) { #if CHARGE_EN if (xcfg_cb.charge_en) { ///入仓自动主从切换 if (CHARGE_DC_IN()) { if (sys_cb.dc_in_filter < CHARGE_DC_IN_FILTER) { sys_cb.dc_in_filter++; } } else { sys_cb.dc_in_filter = 0; } } #endif } //50ms timer process if ((tmr5ms_cnt % 10) == 0) { ticks_50ms++; #if BT_PWRKEY_5S_DISCOVER_EN pwrkey_5s_on_check(); #endif // BT_PWRKEY_5S_DISCOVER_EN #if HLW_UI hlw_func_anc_led_handle(); #endif // HLW_UI } //100ms timer process if ((tmr5ms_cnt % 20) == 0) { lowpwr_tout_ticks(); #if UDE_HID_EN if (func_cb.sta == FUNC_USBDEV) { ude_tmr_isr(); } #endif // UDE_HID_EN gui_box_isr(); //显示控件计数处理 if (sys_cb.lpwr_cnt > 0) { sys_cb.lpwr_cnt++; } #if HLW_UI hlw_bt_disconnect_count_process(); #endif #if USER_NTC #if HLW_UI sys_ntc_check(); #endif #endif if (sys_cb.key2unmute_cnt) { sys_cb.key2unmute_cnt--; if (!sys_cb.key2unmute_cnt) { msg_enqueue(EVT_KEY_2_UNMUTE); } } dac_fifo_detect(); } //500ms timer process if ((tmr5ms_cnt % 100) == 0) { sys_cb.cm_times++; #if FUNC_CLOCK_EN msg_enqueue(MSG_SYS_500MS); #endif // FUNC_CLOCK_EN #if HLW_UI hlw_func_poweron_first_battery_process(); #endif } //1s timer process if ((tmr5ms_cnt % 200) == 0) { msg_enqueue(MSG_SYS_1S); #if HLW_UI hlw_func_low_bat_count_handle(); hlw_func_qian30s_count_handle(); #else sys_cb.lpwr_warning_cnt++; #endif // HLW_UI #if HLW_UI hlw_func_battery_process(); #endif } //10s timer process if ((tmr5ms_cnt % 6000) == 0) { msg_enqueue(EVT_MSG_SYS_30S); tmr5ms_cnt = 0; } } uint bsp_get_bat_level(void) { #if VBAT_DETECT_EN //计算方法：level = (实测电压 - 关机电压) / ((满电电压 - 关机电压) / 100) u16 bat_off = LPWR_OFF_VBAT * 100 + 2700; if (bat_off > sys_cb.vbat) { return 0; } uint bat_level = (sys_cb.vbat - bat_off) / ((4200 - bat_off) / 100); //printf("bat level: %d %d\n", sys_cb.vbat, bat_level); if (bat_level > 100) { bat_level = 100; } return bat_level; #else return 100; #endif } AT(.text.bsp.sys.init) static void rtc_32k_configure(void) { u32 temp = RTCCON0; // //xosc_div768_rtc // temp &= ~BIT(6); // temp |= BIT(9) | BIT(8); //sel xosc_div768_rtc // RTCCON0 = temp; // RTCCON4 |= BIT(17); //xosc24m low power clk enable // RTCCON2 = 31249; //clk2m_rtc_div32 temp &= ~BIT(6); temp &= ~(BIT(9) | BIT(8)); temp |= BIT(8); temp |= BIT(2) | BIT(0); RTCCON0 = temp; RTCCON2 = sys_get_rc2m_rtc_clk() / 32 - 1; } AT(.text.bsp.sys.init) bool rtc_init(void) { u32 temp; rtc_32k_configure(); sys_cb.rtc_first_pwron = 0; temp = RTCCON0; if (temp & BIT(7)) { temp &= ~BIT(7); //clear first poweron flag RTCCON0 = temp; sys_cb.rtc_first_pwron = 1; #if FUNC_CLOCK_EN rtc_clock_init(); #endif // FUNC_CLOCK_EN printf("rtc 1st pwrup\n"); return false; } return true; } //UART0打印信息输出GPIO选择，UART0默认G1(PA7) void uart0_mapping_sel(void) { //等待uart0发送完成 if(UART0CON & BIT(0)) { while (!(UART0CON & BIT(8))); } GPIOEDE &= ~BIT(13); GPIOEPU &= ~BIT(13); GPIOBPU &= ~(BIT(2) | BIT(3)); FUNCMCON0 = (0xf << 12) | (0xf << 8); //clear uart0 mapping #if (UART0_PRINTF_SEL == PRINTF_PA7) GPIOADE |= BIT(7); GPIOAPU |= BIT(7); GPIOADIR |= BIT(7); GPIOAFEN |= BIT(7); GPIOADRV |= BIT(7); FUNCMCON0 = URX0MAP_TX | UTX0MAP_PA7; //RX0 Map To TX0, TX0 Map to G1 #elif (UART0_PRINTF_SEL == PRINTF_PB2) GPIOBDE |= BIT(2); GPIOBPU |= BIT(2); GPIOBDIR |= BIT(2); GPIOBFEN |= BIT(2); FUNCMCON0 = URX0MAP_TX | UTX0MAP_PB2; //RX0 Map To TX0, TX0 Map to G2 #elif (UART0_PRINTF_SEL == PRINTF_PB3) GPIOBDE |= BIT(3); GPIOBPU |= BIT(3); GPIOBDIR |= BIT(3); GPIOBFEN |= BIT(3); FUNCMCON0 = URX0MAP_TX | UTX0MAP_PB3; //RX0 Map To TX0, TX0 Map to G3 #elif (UART0_PRINTF_SEL == PRINTF_PE7) GPIOEDE |= BIT(7); GPIOEPU |= BIT(7); GPIOEDIR |= BIT(7); GPIOEFEN |= BIT(7); FUNCMCON0 = URX0MAP_TX | UTX0MAP_PE7; //RX0 Map To TX0, TX0 Map to G4 #elif (UART0_PRINTF_SEL == PRINTF_PE0) GPIOEDE |= BIT(0); GPIOEPU |= BIT(0); GPIOEDIR |= BIT(0); GPIOEFEN |= BIT(0); FUNCMCON0 = URX0MAP_TX | UTX0MAP_PE0; //RX0 Map To TX0, TX0 Map to G5 #elif (UART0_PRINTF_SEL == PRINTF_VUSB) FUNCMCON0 = URX0MAP_TX | UTX0MAP_VUSB; //RX0 Map To TX0, TX0 Map to G8 #endif } //开user timer前初始化的内容 AT(.text.bsp.sys.init) static void sys_var_init(void) { u32 rst_reason = sys_cb.rst_reason; memset(&sys_cb, 0, sizeof(sys_cb)); sys_cb.rst_reason = rst_reason; sys_cb.loudspeaker_mute = 1; sys_cb.ms_ticks = tick_get(); sys_cb.pwrkey_5s_check = 1; xcfg_cb.vol_max = (xcfg_cb.vol_max) ? 32 : 16; sys_cb.hfp2sys_mul = (xcfg_cb.vol_max + 2) / 16; if (SYS_INIT_VOLUME > xcfg_cb.vol_max) { SYS_INIT_VOLUME = xcfg_cb.vol_max; } if (WARNING_VOLUME > xcfg_cb.vol_max) { WARNING_VOLUME = xcfg_cb.vol_max; } sys_cb.sleep_time = -1L; sys_cb.pwroff_time = -1L; if (xcfg_cb.sys_sleep_time != 0) { sys_cb.sleep_time = (u32)xcfg_cb.sys_sleep_time * 10; //100ms为单位 } if (xcfg_cb.sys_off_time != 0) { sys_cb.pwroff_time = (u32)xcfg_cb.sys_off_time * 10; //100ms为单位 } sys_cb.sleep_delay = -1L; sys_cb.pwroff_delay = -1L; sys_cb.sleep_en = 0; sys_cb.lpwr_warning_times = LPWR_WARING_TIMES; sys_cb.led_scan_en = 1; if(xcfg_cb.osci_cap == 0 && xcfg_cb.osco_cap == 0) { //没有过产测时，使用自定义OSC电容 xcfg_cb.osci_cap = xcfg_cb.uosci_cap; xcfg_cb.osco_cap = xcfg_cb.uosco_cap; } if(xcfg_cb.ft_rf_param_en == 0 && xcfg_cb.bt_rf_param_en) { //使用自定义参数时，不需要微调 xcfg_cb.bt_rf_pwrdec = 0; } #if HLW_UI hlw_func_var_init(); #endif saradc_var_init(); key_var_init(); plugin_var_init(); msg_queue_init(); bsp_res_init(); dev_init(((u8)is_sd_support()) | ((u8)is_usb_support() * 0x02)); #if SD_SOFT_DETECT_EN if (SD_IS_SOFT_DETECT()) { dev_delay_times(DEV_SDCARD, 3); } #endif #if MUSIC_SDCARD_EN if((xcfg_cb.sddet_iosel == IO_MUX_SDCLK) || (xcfg_cb.sddet_iosel == IO_MUX_SDCMD)) { dev_delay_offline_times(DEV_SDCARD, 3); //复用时, 加快拔出检测. 这里拔出检测为3次. } #endif sdadc_var_init(); #if SDADC_5CH_EN sdadc_set_5ch_en(); #endif #if (MUSIC_UDISK_EN || MUSIC_SDCARD_EN) fs_var_init(); #endif music_stream_var_init(); msc_pcm_out_var_init(); dac_cb_init((DAC_CH_SEL & 0x0f) | (0x200 * DAC_FAST_SETUP_EN) | (0x400 * DAC_VCM_CAPLESS_EN) \ | (0x800 * DAC_MAXOUT_EN)); #if ANC_EN anc_var_init(); #endif } AT(.text.bsp.sys.init) static void sys_io_init(void) { //全部设置成模拟GPIO，防止漏电。使用时，自行配置对应数字GPIO GPIOADE = 0; GPIOBDE = 0; GPIOEDE = 0; GPIOFDE = 0; GPIOGDE = 0x3F; //MCP FLASH uart0_mapping_sel(); //调试UART IO选择或关闭 #if !USB_BC_EN usb_bc_init(1); #endif #if LINEIN_DETECT_EN LINEIN_DETECT_INIT(); #endif // LINEIN_DETECT_EN #if MUSIC_SDCARD_EN SD_DETECT_INIT(); #endif // MUSIC_SDCARD_EN LOUDSPEAKER_MUTE_INIT(); #if USER_INEAR_DET_OPT INEAR_OPT_PORT_INIT() #endif #if HLW_UI sys_pe4_power_gate_set(1); #endif } void xosc_get_cfg_cap(u8 *osci_cap, u8 *osco_cap, u8 *both_cap) { *osci_cap = xcfg_cb.osci_cap; *osco_cap = xcfg_cb.osco_cap; *both_cap = xcfg_cb.osc_both_cap; } #if 0 //port_int_example AT(.com_text) const char strisr0[] = ">>[0x%X]_[0x%X]\n"; const char strisr1[] = "portisr->"; AT(.com_text.timer) void port_isr(void) { printf(strisr0,WKUPEDG,WKUPCPND); if (WKUPEDG & (BIT(6) << 16)) { WKUPCPND = (BIT(6) << 16); //CLEAR PENDING printf(strisr1); } } void port_int_example(void) //sys_set_tmr_enable(1, 1); 前调用 测试OK { GPIOFDE |= BIT(0); GPIOFDIR |= BIT(0); GPIOFFEN &= ~BIT(0); GPIOFPU |= BIT(0); sys_irq_init(IRQ_PORT_VECTOR,0, port_isr); PORTINTEN |= BIT(21); PORTINTEDG |= BIT(21); //falling edge; WKUPEDG |= BIT(6); //falling edge WKUPCON = BIT(6) | BIT(16); //falling edge wake iput //wakeup int en printf("PORTINTEN = 0x%X, PORTINTEDG = 0x%X WKUPEDG = 0x%X, WKUPCON = 0x%X\n", PORTINTEN, PORTINTEDG, WKUPEDG, WKUPCON); WDT_CLR(); while(1) { // printf("WKUPEDG = 0x%X\n", WKUPEDG); // printf("GPIOF = 0x%X\n", GPIOF); // delay_ms(500); } } #endif AT(.text.bsp.power) bool power_off_check(void) { #if CHARGE_EN u16 charge_cnt = 0; #endif u32 pwron_press_nms; int pwrkey_pressed_flag, ticks = 0, up_cnt = 0; u8 restart_chk_en = 1; pwrkey_pressed_flag = 0; pwron_press_nms = PWRON_PRESS_TIME; if (pwron_press_nms == 0) { pwron_press_nms = 15; //bootloader 80ms + 15ms, 最小开机时间在100ms左右 } //要等PWRKEY开关释放后再次按下才能重新开机, 否则充电过程中5分钟关机, 低电关机等异常 if ((PWRKEY_2_HW_PWRON) && (sys_cb.poweron_flag)) { restart_chk_en = 0; sys_cb.poweron_flag = 0; } while (1) { WDT_CLR(); delay_ms(5); if ((bsp_key_pwr_scan() & K_PWR_MASK) == K_PWR) { up_cnt = 0; if (restart_chk_en) { if (!pwrkey_pressed_flag) { ticks = tick_get(); pwrkey_pressed_flag = 1; sys_cb.ms_ticks = tick_get(); //记录PWRKEY按键按下的时刻 sys_cb.pwrkey_5s_check = 1; } if (!sys_cb.poweron_flag) { if (tick_check_expire(ticks, pwron_press_nms)) { //长按开机时间配置 sys_cb.poweron_flag = 1; sys_cb.pwrdwn_hw_flag = 0; //清PWRKEY硬开关的关机标志 } } } } else { if (up_cnt < 3) { up_cnt++; } if (up_cnt == 3) { up_cnt = 10; sys_cb.poweron_flag = 0; pwrkey_pressed_flag = 0; restart_chk_en = 1; } } #if CHARGE_EN if (xcfg_cb.charge_en) { charge_cnt++; if (charge_cnt > 20) { charge_cnt = 0; charge_detect(0); } } #endif // CHARGE_EN if (sys_cb.poweron_flag) { if ((CHARGE_DC_NOT_PWRON) && CHARGE_DC_IN()) { continue; } #if LINEIN_2_PWRDOWN_EN if (dev_is_online(DEV_LINEIN)) { continue; } #endif // LINEIN_2_PWRDOWN_EN //长按PP/POWER开机 gui_display(DISP_POWERON); led_power_up(); dac_restart(); bsp_change_volume(sys_cb.vol); #if WARNING_POWER_ON #if WARNING_WSBC_EN wsbc_res_play(RES_BUF_POWERON, RES_LEN_POWERON); #else mp3_res_play(RES_BUF_POWERON, RES_LEN_POWERON); #endif #endif // WARNING_POWER_ON if (PWRON_ENTER_BTMODE_EN) { func_cb.sta = FUNC_BT; if (dev_is_online(DEV_UDISK)) { sys_cb.cur_dev = DEV_UDISK; } else { sys_cb.cur_dev = DEV_SDCARD; } } else { if (dev_is_online(DEV_SDCARD) || dev_is_online(DEV_UDISK) || dev_is_online(DEV_SDCARD1)) { func_cb.sta = FUNC_MUSIC; if (dev_is_online(DEV_UDISK)) { sys_cb.cur_dev = DEV_UDISK; } else if (dev_is_online(DEV_SDCARD1)) { sys_cb.cur_dev = DEV_SDCARD1; } else { sys_cb.cur_dev = DEV_SDCARD; } } else { #if FUNC_BT_EN func_cb.sta = FUNC_BT; #elif FUNC_CLOCK_EN func_cb.sta = FUNC_CLOCK; #else func_cb.sta = FUNC_IDLE; #endif } } return true; } else { if (CHARGE_DC_IN()) { continue; } else { return false; } } } } AT(.text.bsp.power) static bool power_on_frist_enable(u32 rtccon9) { if (!PWRON_FRIST_BAT_EN) { return false; } if (rtccon9 & BIT(4)) { //charge inbox wakeup return false; } if (rtccon9 & BIT(2)) { //WKO wakeup不能直接开机 return false; } if (rtccon9 & BIT(6)) { //TK Wakeup pending return false; } if (CHARGE_DC_IN() && (CHARGE_DC_NOT_PWRON) && (xcfg_cb.charge_en)) { //VUSB充电禁止开机 return false; } return true; } static bool power_on_check_do_pre(u32 rtccon9) { bool ret = false; //第一次上电是否直接开机 if (power_on_frist_enable(rtccon9)) { ret = true; } if(sys_cb.sw_rst_flag == SW_RST_FLAG){ ret = true; } #if HLW_UI else if(sys_cb.sw_rst_flag == SW_RST_CLEAR_PAIRLIST){ hlw_cb.clear_pairlist_flag = true; ret = true; } #endif // HLW_UI if (sys_cb.rst_reason & BIT(19)) { //is wko 10s reset pending if (PWRKEY_IS_PRESS()) { sys_cb.poweron_flag = 1; } ret = true; //长按PWRKEY 10S复位后直接开机。 } #if QTEST_EN if(qtest_get_mode()){ ret = true; } #endif #if IODM_TEST_EN if (cm_read8(PARAM_RST_FLAG) == RST_FLAG_MAGIC_VALUE) { cm_write8(PARAM_RST_FLAG, 0); cm_sync(); printf("iodm rst power_on\n"); ret = true; } #endif #if USER_PWRKEY if ((!xcfg_cb.user_pwrkey_en) && (!PWRKEY_2_HW_PWRON) && (!sys_cb.tkey_pwrdwn_en)) { ret = true; } #endif return ret; } AT(.text.bsp.power) static void power_on_check_do(void) { int pwrkey_pressed_flag = 0; int up_cnt = 0, ticks = 0; u32 pwron_press_nms; u8 chbox_sta = 1; //默认offline u32 rtccon9 = RTCCON9; //wakeup pending printf("power_on_check_do: %08x\n", rtccon9); RTCCON9 = 0xffff; //Clr pending RTCCON10 = BIT(10) | BIT(1) | BIT(0); //Clr pending CRSTPND = 0x1ff0000; //clear reset pending LVDCON &= ~(0x1f << 8); //clear software reset RTCCON13 &= ~BIT(16); //wko pin0 low level wakeup #if HLW_UI if((rtccon9 & 0x08) == 0x08) { printf("charge poweron\n"); hlw_cb.charge_poweron_flag = true; } #endif if (power_on_check_do_pre(rtccon9)) { return; } #if CHARGE_EN if (charge_power_on_pre(rtccon9)) { return; } #endif #if USER_PWRKEY if (PWRKEY_IS_PRESS() || TKEY_IS_PRESS()) { //PWRKEY是否按下 pwrkey_pressed_flag = 1; ticks = sys_cb.ms_ticks; } #endif // USER_PWRKEY pwron_press_nms = PWRON_PRESS_TIME; if (pwron_press_nms == 0) { pwron_press_nms = 15; //最小开机时间在100ms左右 } while (1) { WDT_CLR(); #if CHARGE_LOW_POWER_EN delay_us(350); #else delay_5ms(1); #endif bsp_key_scan_do(); if ((bsp_key_pwr_scan() & K_PWR_MASK) == K_PWR) { up_cnt = 0; if (!pwrkey_pressed_flag) { ticks = tick_get(); sys_cb.ms_ticks = ticks; //记录PWRKEY按键按下的时刻 pwrkey_pressed_flag = 1; } if (!sys_cb.poweron_flag) { if (tick_check_expire(ticks, pwron_press_nms)) { //长按开机时间配置 sys_cb.poweron_flag = 1; } } } else { if (up_cnt < 3) { up_cnt++; } if (up_cnt == 3) { up_cnt = 10; pwrkey_pressed_flag = 0; sys_cb.poweron_flag = 0; } } #if LINEIN_2_PWRDOWN_EN linein_detect(); #endif // LINEIN_2_PWRDOWN_EN #if CHARGE_EN if (xcfg_cb.charge_en) { chbox_sta = charge_charge_on_process(); if (chbox_sta == 2) { #if !HLW_UI break; //充电仓拿起开机 #endif // HLW_UI } } #endif // CHARGE_EN if (sys_cb.poweron_flag) { #if VBAT_DETECT_EN if (sys_cb.vbat <= 2950) { //电压小于2.95v不开机 continue; } #endif if ((CHARGE_DC_NOT_PWRON) && CHARGE_DC_IN()) { continue; } #if LINEIN_2_PWRDOWN_EN if (dev_is_online(DEV_LINEIN)) { continue; } #endif // LINEIN_2_PWRDOWN_EN break; } else { //PWKKEY已松开, 不在充电仓或未充电直接进行关机 #if HLW_UI if((!pwrkey_pressed_flag)){ #else if ((!pwrkey_pressed_flag) && (chbox_sta)) { #endif // HLW_UI if ((!SOFT_POWER_ON_OFF) || ((!sys_cb.wko_pwrkey_en) && (!USER_TKEY_SOFT_PWR_EN))) { break; //没有按键软开关机功能，不在充电状态直接开机 } #if HLW_UI if(hlw_cb.charge_poweron_flag && CHARGE_DC_IN()) { break; } #endif #if CHARGE_EN charge_exit(); #endif unlock_code_charge(); bsp_saradc_exit(); sfunc_pwrdown(1); } } } #if CHARGE_EN charge_exit(); #endif } AT(.text.bsp.power) void power_on_check(void) { lock_code_charge(); power_on_check_do(); #if CHARGE_BOX_EN charge_box_reinit(); #endif unlock_code_charge(); } AT(.text.bsp.sys.init) void sys_init(void) { /// config if (!xcfg_init(&xcfg_cb, sizeof(xcfg_cb))) { //获取配置参数 printf("xcfg init error\n"); WDT_RST(); while(1); } // io init sys_io_init(); // var init sys_var_init(); // power init pmu_init(getcfg_buck_mode_en()); //audio pll init adpll_init(DAC_OUT_SPR); // clock init sys_clk_set(SYS_CLK_SEL); // peripheral init rtc_init(); param_init(sys_cb.rtc_first_pwron); //晶振配置 xosc_init(); plugin_init(); if (POWKEY_10S_RESET) { WKO_10SRST_EN(0); //10s reset source select 0: wko pin press, 1: touch key press } else { WKO_10SRST_DIS(); } led_init(); #if CHARGE_EN if (xcfg_cb.charge_en) { charge_init(); } #endif key_init(); #if QTEST_EN if(QTEST_IS_ENABLE()) { qtest_init(); } #endif #if HUART_EN if(xcfg_cb.huart_en){ bsp_huart_init(); } #endif // HUART_EN #if UART1_EN if (xcfg_cb.uart1_en) { bsp_uart1_init(9600); } #elif UART2_EN if (xcfg_cb.uart2_en) { bsp_uart2_init(9600); } #endif bt_init(); power_on_check(); //在key_init之后 gui_init(); #if PWM_RGB_EN pwm_init(); #endif // PWM_RGB_EN gsensor_init(); en_auto_pwroff(); /// enable user timer for display & dac sys_set_tmr_enable(1, 1); #if !HLW_UI led_power_up(); #endif gui_display(DISP_POWERON); #if ANC_EQ_RES2_EN copy_res2flash(); #endif if (bsp_dac_off_for_bt_conn()) { dac_init(); func_bt_init(); } else { func_bt_init(); dac_init(); } codecs_pcm_init(); #if TINY_TRANSPARENCY_EN bsp_ttp_init(); #endif app_init_do(); bsp_change_volume(sys_cb.vol); #if HLW_UI bt_get_local_bd_addr(hlw_cb.bt_addr); print_r(hlw_cb.bt_addr,6); hlw_cb.exist_pairlist_flag = bt_nor_get_link_info(NULL); #endif // HLW_UI #if WARNING_POWER_ON if ((xcfg_cb.bt_outbox_voice_pwron_en) || (!sys_cb.outbox_pwron_flag)) { #if HLW_UI //不是清除记录复位重启，不是插入5V开机,就播开机提示音 if((!hlw_cb.charge_poweron_flag)&&(!hlw_cb.clear_pairlist_flag)) { hlw_cb.poweron_led_control_flag = true; hlw_cb.poweron_voice_flag = true; hlw_cb.poweron_bat_voice_flag = true; led_power_up(); #if WARNING_WSBC_EN wsbc_res_play(RES_BUF_POWERON, RES_LEN_POWERON); #else mp3_res_play(RES_BUF_POWERON, RES_LEN_POWERON); #endif } #else #if WARNING_WSBC_EN wsbc_res_play(RES_BUF_POWERON, RES_LEN_POWERON); #else mp3_res_play(RES_BUF_POWERON, RES_LEN_POWERON); #endif #endif } sys_cb.outbox_pwron_flag = 0; #endif // WARNING_POWER_ON if (PWRON_ENTER_BTMODE_EN) { func_cb.sta = FUNC_BT; if (dev_is_online(DEV_UDISK)) { sys_cb.cur_dev = DEV_UDISK; } else { sys_cb.cur_dev = DEV_SDCARD; } } else { #if SD_SOFT_DETECT_EN sd_soft_detect_poweron_check(); #endif #if FUNC_MUSIC_EN if (dev_is_online(DEV_SDCARD) || dev_is_online(DEV_UDISK) || dev_is_online(DEV_SDCARD1)) { func_cb.sta = FUNC_MUSIC; if (dev_is_online(DEV_UDISK)) { sys_cb.cur_dev = DEV_UDISK; } else if (dev_is_online(DEV_SDCARD1)) { sys_cb.cur_dev = DEV_SDCARD1; } else { sys_cb.cur_dev = DEV_SDCARD; } } else #endif // FUNC_MUSIC_EN { #if FUNC_AUX_EN if (dev_is_online(DEV_LINEIN)) { func_cb.sta = FUNC_AUX; } else #endif // FUNC_AUX_EN { #if HLW_UI if(hlw_cb.charge_poweron_flag) { if(!CHARGE_DC_IN()) { func_cb.sta = FUNC_PWROFF; } else { func_cb.sta = FUNC_CHARGE; } hlw_cb.charge_poweron_flag = false; } if(func_cb.sta == FUNC_CHARGE) { if(dev_is_online(DEV_USBPC)) { func_cb.sta = FUNC_USBDEV; } } if((func_cb.sta != FUNC_CHARGE)&&(func_cb.sta != FUNC_PWROFF)&&(func_cb.sta != FUNC_USBDEV) &&(func_cb.sta != FUNC_BT_DUT)&&(func_cb.sta != FUNC_BT_FCC)&&(func_cb.sta != FUNC_BT_IODM)) { func_cb.sta = FUNC_BT; } #else func_cb.sta = FUNC_BT; #endif } } } #if SYS_MODE_BREAKPOINT_EN u8 sta = param_sys_mode_read(); if (sta != 0 && sta != 0xff) { func_cb.sta = sta & 0xf; if (func_cb.sta == FUNC_MUSIC) { sys_cb.cur_dev = sta >> 4; } } #endif // SYS_MODE_BREAKPOINT_EN #if LINEIN_2_PWRDOWN_EN if (dev_is_online(DEV_LINEIN)) { sys_cb.pwrdwn_tone_en = LINEIN_2_PWRDOWN_TONE_EN; func_cb.sta = FUNC_PWROFF; } #endif // LINEIN_2_PWRDOWN_EN #if BT_BACKSTAGE_EN bsp_bt_init(); #endif #if EQ_DBG_IN_UART || EQ_DBG_IN_SPP eq_dbg_init(); #endif // EQ_DBG_IN_UART #if PLUGIN_SYS_INIT_FINISH_CALLBACK plugin_sys_init_finish_callback(); //初始化完成, 各方案可能还有些不同参数需要初始化,预留接口到各方案 #endif #if SYS_KARAOK_EN bsp_karaok_init(AUDIO_PATH_KARAOK, func_cb.sta); #endif #if BT_MUSIC_EFFECT_EN music_effect_init(); #endif // BT_MUSIC_EFFECT_EN #if HLW_UI //把EQ放在音阶之后 DACBQ0CON |= BIT(24); #endif // HLW_UI } AT(.text.bsp.sys.init) void sys_update_init(void) { /// config if (!xcfg_init(&xcfg_cb, sizeof(xcfg_cb))) { //获取配置参数 printf("xcfg init error\n"); } // io init sys_io_init(); // var init sys_var_init(); sys_cb.lang_id = 0; // power init pmu_init(getcfg_buck_mode_en()); // peripheral init rtc_init(); param_init(sys_cb.rtc_first_pwron); //晶振配置 xosc_init(); plugin_init(); sys_set_tmr_enable(1, 1); adpll_init(DAC_OUT_SPR); dac_init(); mp3_res_play(RES_BUF_UPDATE_DONE_MP3, RES_LEN_UPDATE_DONE_MP3); }