/* * api_btstack.h * * Created by zoro on 2017-8-24. */ #ifndef _API_BTSTACK_H #define _API_BTSTACK_H //工作模式 #define MODE_NORMAL 0 //正常连接模式，关闭DUT测试 #define MODE_NORMAL_DUT 1 //正常连接模式，使能DUT测试 #define MODE_FCC_TEST 2 //FCC测试模式，通过串口通信 #define MODE_BQB_RF_BREDR 3 //BR/EDR DUT测试模式，通过蓝牙通信 #define MODE_BQB_RF_BLE 4 //BLE DUT测试模式，通过串口通信 #define MODE_IODM_TEST 5 //IODM测试模式，通过串口通信 //包类型 #define FCC_TYPE_MODE_UNDEFINE 0 #define FCC_TYPE_MODE_BR 1 #define FCC_TYPE_MODE_EDR 2 #define FCC_TYPE_MODE_BLE1M 4 #define FCC_TYPE_MODE_BLE2M 8 //蓝牙功能 #define PROF_A2DP 0x0007 //蓝牙音乐功能 #define PROF_HID 0x0018 //蓝牙键盘功能 #define PROF_HFP 0x0060 //蓝牙通话功能 #define PROF_SPP 0x0080 //蓝牙串口功能 #define PROF_PBAP 0x0100 //蓝牙电话本功能 #define PROF_HSP 0x0200 #define PROF_GATT 0x0800 #define PROF_MAP 0x0400 //蓝牙短信功能 //蓝牙特性 #define HFP_BAT_REPORT 0x01 //是否支持手机电量显示 #define HFP_3WAY_CALL 0x02 //是否支持三通电话 #define HFP_INBAND_RING_TONE 0x04 //是否支持手机来电铃声 #define HFP_CALL_PRIVATE 0x08 //是否打开强制私密接听 #define HFP_SIRI_CMD 0x10 //是否打开siri控制命令 #define HFP_EC_AND_NR 0x20 //是否打开手机端回音和降噪 #define HFP_RING_NUMBER_EN 0x40 //是否支持来电报号 #define A2DP_AVRCP_VOL_CTRL 0x01 //是否支持手机音量控制同步 #define A2DP_AVRCP_PLAY_STATUS_IOS 0x02 //是否支持IOS手机播放状态同步，可加快播放暂停响应速度，蓝牙后台建议打开；注意：打开后微信小视频会无声 #define A2DP_AVRCP_PLAY_STATUS 0x04 //是否支持手机播放状态同步，可加快播放暂停响应速度，蓝牙后台建议打开； #define A2DP_RESTORE_PLAYING 0x08 //是否支持掉线回连后恢复播放 #define A2DP_AVDTP_DELAY_REPORT 0x10 //是否支持AVDTP delay report功能 #define A2DP_AVDTP_DYN_LATENCY 0x20 //是否支持动态延迟控制功能 #define A2DP_AVDTP_EXCEPT_REST_PLAY 0x40 //是否支持异常复位后恢复连接和播放状态功能 //a2dp特性扩展1 #define A2DP_AVRCP_RECORD_DEVICE_VOL 0x01 //分别记录不同连接设备的音量 #define A2DP_RESET_DEVICE_VOL 0x02 //不支持音量同步手机，连接恢复音量 #define A2DP_PLAY_SEQN_OPT 0x04 //是否支持不连续seqn pkt播放 //hfp特性扩展 #define HFP_RECORD_DEVICE_VOL 0x01 //分别记录不同连接设备的音量 #define HFP_INBAND_RING_TONE_CHANGE 0x02 //是否接受远端inband状态改变 //SPP rfcomm通道号 #define SPP_RFCOMM_SERVER_CHANNEL0 1 #define SPP_RFCOMM_SERVER_CHANNEL1 5 #define SPP_RFCOMM_SERVER_CHANNEL2 6 //蓝牙编解码 #define CODEC_SBC 0x01 #define CODEC_AAC 0x02 #define CODEC_MSBC 0x04 #define CODEC_PLC 0x08 #define CODEC_LHDCV5 0x10 #define CODEC_LHDCV4 0x20 #define CODEC_LDAC 0x40 //TWS feature #define TWS_FEAT_TSCO 0x0001 //双耳通话 #define TWS_FEAT_TSCO_RING 0x0002 //同步铃声 #define TWS_FEAT_CODEC_MSBC 0x0004 //MSBC高清通话 #define TWS_FEAT_CODEC_AAC 0x0008 //AAC高清音频 #define TWS_FEAT_MS_SWITCH 0x0010 //主从切换 #define TWS_FEAT_NAME_MENU 0x0020 //蓝牙改名称菜单 #define TWS_FEAT_MS_BONDING 0x0040 //主从绑定 #define TWS_FEAT_PAIR_NOR_LINKINFO 0x0400 //TWS配对时判断是否存在手机信息，有信息的为主耳 #define TWS_FEAT_VERSION_MASK 0x0380 //版本号, bit7~9 #define TWS_FEAT_CODEC_HIRES 0x1000 //LHDC&LADC #define TWS_FEAT_PUBLIC_ADDR 0x2000 //TWS连接后主耳使用公共地址连接手机 #define TWS_FEAT_SNATCH 0x4000 //TWS一拖一和一拖二是否支持抢连 //一拖二特性 #define BT_2ACL_SCAN_ALWAYS 0x0001 //连接第一个设备继续打开可被发现 #define BT_2ACL_RECONN_ODEV 0x0002 //只回连最后一次连接的手机 #define BT_2ACL_SNATCH 0x0004 //是否支持一拖一抢连和一拖二抢连 //TWS pair #define TWS_PAIR_OP_MASK 0x0f #define TWS_PAIR_OP_AUTO 0x00 #define TWS_PAIR_OP_API 0x01 #define TWS_PAIR_MS_BONDING_MASK 0x20 #define TWS_PAIR_MS_BONDING 0x20 #define TWS_PAIR_MODE_MASK 0xc0 #define TWS_PAIR_MODE_BTID 0x40 #define TWS_PAIR_MODE_BTNAME 0x00 #define BT_TWS_SYNC_TO 50 //BT同步等待，对齐到一个50ms，250ms超时 //删除配对信息TAG #define BT_INFO_TAG_NOR "NULL" //删除手机 #define BT_INFO_TAG_UNPAIR "UPAR" //删除TWS，并断开 #define BT_INFO_TAG_QTEST "QTET" //快测删除TWS配对信息 #define BT_INFO_TAG_IODM "IODM" //IODM删除TWS配对信息 #define BT_INFO_TAG_CHARGE_BOX "CBOX" //充电仓删除TWS配对信息 #define BT_INFO_TAG_USER "USER" //用户删除TWS配对信息 //蓝牙状态 enum { BT_STA_OFF, //蓝牙模块已关闭 BT_STA_INITING, //初始化中 BT_STA_IDLE, //蓝牙模块打开，未连接 BT_STA_SCANNING, //扫描中 BT_STA_DISCONNECTING, //断开中 BT_STA_CONNECTING, //连接中 BT_STA_CONNECTED, //已连接 BT_STA_PLAYING, //播放 BT_STA_INCOMING, //来电响铃 BT_STA_OUTGOING, //正在呼出 BT_STA_INCALL, //通话中 BT_STA_RES, //保留 BT_STA_OTA, //OTA升级中 }; //通话状态 enum { BT_CALL_IDLE, // BT_CALL_INCOMING, //来电响铃 BT_CALL_OUTGOING, //正在呼出 BT_CALL_ACTIVE, //通话中 BT_CALL_3WAY_CALL, //三通电话或两部手机通话 }; //蓝牙通知 enum { BT_NOTICE_INIT_FINISH, //蓝牙初始化完成 BT_NOTICE_CONNECT_START, //开始回连手机, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_CONNECT_FAIL, //回连手机失败, param[0]=reason, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_DISCONNECT, //蓝牙断开, param[0]=feat,index, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_LOSTCONNECT, //蓝牙连接丢失, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_CONNECTED, //蓝牙连接成功, param[0]=feat,index, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_SCO_SETUP, BT_NOTICE_SCO_FAIL, BT_NOTICE_SCO_KILL, BT_NOTICE_INCOMING, //来电 BT_NOTICE_RING, //来电响铃 BT_NOTICE_OUTGOING, //去电 BT_NOTICE_CALL_NUMBER, //来电/去电号码 BT_NOTICE_CALL, //建立通话 BT_NOTICE_SET_SPK_GAIN, //设置通话音量 BT_NOTICE_CALL_CHANGE_DEV, //1拖2时改变了通话设备 BT_NOTICE_MUSIC_PLAY, //蓝牙音乐开始播放 BT_NOTICE_MUSIC_STOP, //蓝牙音乐停止播放 BT_NOTICE_MUSIC_CHANGE_VOL, //手机端改变蓝牙音乐音量, param[0]=down/up, param[1]=index, param[7:2]=bd_addr BT_NOTICE_MUSIC_SET_VOL, //手机端设置蓝牙音乐音量, param[0]=a2dp_vol, param[1]=index, param[7:2]=bd_addr BT_NOTICE_MUSIC_CHANGE_DEV, //1拖2时改变了播放设备, 例如从A手机切换到B手机, param[0]=a2dp_vol, param[1]=index, param[7:2]=bd_addr BT_NOTICE_HID_CONN_EVT, //HID服务连接事件 BT_NOTICE_RECON_FINISH, //回连完成, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_ABORT_STATUS, //中止状态, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_NORCONNECT_FAIL, //手机发起连接到一半失败, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_LOW_LATENCY_STA, //低延时状态切换 BT_NOTICE_TWS_SEARCH_FAIL = 0x40, //搜索TWS失败, param[0]=reason(0=timeout, 0x0B=conn_exists, 0x0C=cmd_disallow) BT_NOTICE_TWS_CONNECT_START, //开始回连TWS, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_TWS_CONNECT_FAIL, //TWS回连失败, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_TWS_DISCONNECT, //TWS牙断开, param[0]=feat,index, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_TWS_LOSTCONNECT, //TWS连接丢失, param[0]=status, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_TWS_CONNECTED, //TWS连接成功, param[0]=feat,index, param[1]=reason, param[7:2]=bd_addr BT_NOTICE_TWS_INIT_VOL, //TWS设置副耳初始音乐音量 BT_NOTICE_TWS_HID_SHUTTER, //远端TWS拍照键 BT_NOTICE_TWS_USER_KEY, //TWS自定义按键 BT_NOTICE_TWS_SET_OPERATION, BT_NOTICE_TWS_STATUS_CHANGE, BT_NOTICE_TWS_ROLE_CHANGE, //主从角色变换 BT_NOTICE_TWS_RES5, BT_NOTICE_TWS_RES6, BT_NOTICE_TWS_RES7, BT_NOTICE_TWS_WARNING, BT_NOTICE_PBAP_CONNECTED, BT_NOTICE_PBAP_GET_PHONEBOOK_SIZE_COMPLETE, //获取电话薄数量完成 BT_NOTICE_PBAP_PULL_PHONEBOOK_COMPLETE, //获取电话薄完成 BT_NOTICE_PBAP_DISCONNECT, BT_NOTICE_SNATCH_CON, //抢连 }; //param[0]=feat,index enum { FEAT_TWS_FLAG = 0x80, FEAT_TWS_ROLE = 0x40, FEAT_TWS_MUTE_FLAG = 0x20, FEAT_TWS_FIRST_ROLE = 0x10, FEAT_INCOME_CON = 0x08, FEAT_FIRST_CON = 0x04, FEAT_INDEX_MASK = 0x03, }; //控制消息 enum { BT_CTL_VOL_CHANGE = 0, //音量调整，之后通过回调函数设置音量 BT_CTL_PLAY_PAUSE, //切换播放、暂停 BT_CTL_VOL_UP, //音乐加音量，之后通过回调函数调节音量 BT_CTL_VOL_DOWN, //音乐减音量，之后通过回调函数调节音量 BT_CTL_2ACL_PALY_SWITCH, //一拖二播放切换 BT_CTL_MSC_RES1, BT_CTL_MSC_RES2, BT_CTL_MSC_RES3, BT_CTL_CALL_REDIAL, //回拨电话（最后一次通话） BT_CTL_CALL_REDIAL_NUMBER, //回拨电话（从hfp_get_outgoing_number获取号码） BT_CTL_CALL_ANSWER_INCOM, //接听来电（三通时挂起当前通话） BT_CTL_CALL_ANSWER_INCOM_REJ_OTHER, //接听来电（三通时挂断当前通话） BT_CTL_CALL_TERMINATE, //挂断通话或来电 BT_CTL_CALL_SWAP, //切换三通电话 BT_CTL_CALL_PRIVATE_SWITCH, //切换私密通话 BT_CTL_HFP_REPORT_BAT, //报告电池电量 BT_CTL_HFP_SPK_GAIN, //设置通话扬声器音量 BT_CTL_HFP_MIC_GAIN, //设置通话麦克风音量 BT_CTL_HFP_AT_CMD, //发送AT命令（从hfp_get_at_cmd获取命令） BT_CTL_HFP_SIRI_SW, //唤出/关闭siri BT_CTL_HFP_CUSTOM_AT_CMD, BT_CTL_CALL_ANSWER_INCOM_HOLD_OTHER, BT_CTL_HFP_RES3, BT_CTL_TWS_SWITCH, //主从切换 BT_CTL_NOR_CONNECT, BT_CTL_NOR_DISCONNECT, BT_CTL_HID_CONNECT, BT_CTL_HID_DISCONNECT, BT_CTL_ATT_CONNECT, BT_CTL_ATT_DISCONNECT, BT_CTL_BLE_ADV_DISABLE, //关闭BLE 广播 BT_CTL_BLE_ADV_ENABLE, //打开BLE 广播 BT_CTL_BLE_RES1, BT_CTL_BLE_RES2, BT_CTL_FOT_RESP, BT_CTL_FCC_TEST, BT_CTL_LOW_LATENCY_EN, BT_CTL_LOW_LATENCY_DIS, BT_CTL_EAR_STA_CHANGE, BT_CTL_NR_STA_CHANGE, BT_CTL_AAP_USER_DATA, BT_CTL_ID3_GET_ELE_ATT, //ID3获取歌曲信息（需打开ID3功能） BT_CTL_DUEROS_AI_START, BT_CTL_DUEROS_AI_STOP, BT_CTL_DUEROS_DMA_CTL, BT_CTL_MAX, BT_CTL_A2DP_VOLUME_UP = 0xff0041, //音量加 BT_CTL_A2DP_VOLUME_DOWN = 0xff0042, //音量减 BT_CTL_A2DP_MUTE = 0xff0043, //MUTE BT_CTL_A2DP_PLAY = 0xff0044, //播放 BT_CTL_A2DP_STOP = 0xff0045, //停止 BT_CTL_A2DP_PAUSE = 0xff0046, //暂停 BT_CTL_A2DP_RECORD = 0xff0047, BT_CTL_A2DP_REWIND = 0xff0048, //快退 BT_CTL_A2DP_FAST_FORWARD = 0xff0049, //快进 BT_CTL_A2DP_EJECT = 0xff004a, BT_CTL_A2DP_FORWARD = 0xff004b, //下一曲 BT_CTL_A2DP_BACKWARD = 0xff004c, //上一曲 BT_CTL_A2DP_REWIND_END = 0xff00c8, //结束快退 BT_CTL_A2DP_FAST_FORWARD_END = 0xff00c9, //结束快进 BT_CTL_NO = 0xffffff, }; enum bt_msg_comm_t { COMM_BT_CTL0, //无传参的消息 COMM_BT_START_WORK, //蓝牙开始工作 COMM_BT_SET_SCAN, //设置可被发现/可被连接 COMM_BT_CONNECT, //连接蓝牙 COMM_BT_DISCONNECT, //断开蓝牙 COMM_BT_ABORT_RECONNECT, //中止回连 COMM_BT_ATT_MSG, COMM_BT_SET_SCAN_INTV, //设置PAGE SCAN PARAM COMM_BT_ABORT_PAGE_PSCAN, //中止PAGE和PAGESCAN COMM_BT_ADD_VOL_SET_QUEUE, //添加音量到设置队列中 COMM_BT_SET_SCAN_FORCE, //强制设置可被发现/可被连接 }; enum bt_msg_tws_t { TWS_SET_SCAN, TWS_SEARCH_SLAVE, TWS_USER_KEY, //用户自定义消息（主副互发） TWS_SYNC_INFO, //同步状态消息（主副同步） TWS_SET_STATUS, //tws_send_set_status TWS_RES_ADD, TWS_RES_DONE, TWS_ALARM_REQ, //同步ALARM请求（主发给副） TWS_DISCONNECT, TWS_CONNECT, }; enum bt_msg_hid_t { HID_KEYBOARD, HID_CONSUMER, HID_TOUCH_SCREEN, HID_MOUSE, HID_DOUYIN, HID_SIMPLE_KEYBOARD, }; enum bt_msg_pbap_t { BT_PBAP_CTRL, BT_PBAP_SELECT_PHONEBOOK, BT_PBAP_GET_PHONEBOOK_SIZE, BT_PBAP_PULL_PHONEBOOK, }; //蓝牙消息 enum bt_msg_t { BT_MSG_CTRL = 0, //蓝牙控制消息 BT_MSG_COMM, BT_MSG_RES1, BT_MSG_TWS, //TWS消息 BT_MSG_ADV0, BT_MSG_A2DP, //A2DP消息 BT_MSG_HFP, //HFP消息 BT_MSG_HSP, //HSP消息 BT_MSG_HID, //HID消息，KEYPAD按键/CONSUMER按键/触摸屏 BT_MSG_PBAP, //PBAP消息 BT_MSG_MAX, BT_MSG_RES = 0xf0, //0xf0~0xff保留给传参较多的api }; enum sync_info_enum { SYNC_INFO_SETTING, //VOL/LANG/EQ/BAT/... SYNC_INFO_LEDCNT, //同步 led cnt SYNC_INFO_EQPARAM, SYNC_INFO_FOT_DATA, SYNC_INFO_RING_STA, SYNC_INFO_CUSTOM_DATA, SYNC_INFO_DUEROS_DMA_DATA, }; //tws_status enum { TWS_STA_FLAG = 0x80, TWS_STA_ROLE = 0x40, TWS_STA_NOR_FLAG = 0x01, TWS_STA_NOR_ACL_FLAG = 0x02, }; //LE Addr Type, public or random(static or non resolvable or resolvable) enum { GAP_RANDOM_ADDRESS_TYPE_OFF = 0, //Public GAP_RANDOM_ADDRESS_TYPE_STATIC, GAP_RANDOM_ADDRESS_NON_RESOLVABLE, GAP_RANDOM_ADDRESS_RESOLVABLE, }; //LE状态 enum { LE_STA_STANDBY, LE_STA_ADVERTISING, //正在广播 LE_STA_CONNECTION, //已连接 }; //LE GATT 服务相关 /** BLE GATTS ERR return */ #define BLE_GATTS_SUCCESS 0x00 #define BLE_GATTS_SRVC_TYPE_ERR 0x01 #define BLE_GATTS_SRVC_RULES_ERR 0x02 #define BLE_GATTS_SRVC_PROPS_ERR 0x03 #define BLE_GATTS_SRVC_ATT_FULL_ERR 0x04 #define BLE_GATTS_SRVC_PROFILE_FULL_ERR 0x05 /** att property flag */ #define ATT_BROADCAST 0x01 #define ATT_READ 0x02 #define ATT_WRITE_WITHOUT_RESPONSE 0x04 #define ATT_WRITE 0x08 #define ATT_NOTIFY 0x10 #define ATT_INDICATE 0x20 #define ATT_AUTHENTICATED_SIGNED_WRITE 0x40 #define ATT_EXTENDED_PROPERTIES 0x80 #define ATT_DYNAMIC 0x100 #define ATT_UUID128 0x200 #define ATT_AUTHENTICATION_REQUIRED 0x400 #define ATT_AUTHORIZATION_REQUIRED 0x800 /** define group GATT Server Service Types */ typedef enum { BLE_GATTS_SRVC_TYPE_PRIMARY = 0x00, //Primary Service BLE_GATTS_SRVC_TYPE_SEVONDARY= 0x01, //Secondary Service BLE_GATTS_SRVC_TYPE_INCLUDE = 0x02, //include Type }ble_gatts_service_type; /** define group GATT Server UUID Types */ typedef enum { BLE_GATTS_UUID_TYPE_16BIT = 0x00, //UUID 16BIT BLE_GATTS_UUID_TYPE_128BIT = 0x01, //UUID 128BIT }ble_gatts_uuid_type; /** define GATT handler callback con_handle: connect handle handle : attribute handle flag : call back flag */ #define ATT_CB_FALG_OFFSET (0xffff) #define ATT_CB_FALG_DIR_WRITE (0x10000) typedef int (*ble_gatt_callback_func)(uint16_t con_handle, uint16_t handle, uint32_t flag, uint8_t *ptr, uint16_t len); /** define GATT service base */ typedef struct gatts_service_base{ uint16_t handle; uint8_t att_index; }gatts_service_base_st; /** define GATT service uuid */ typedef struct gatts_uuid_base{ uint16_t props; uint8_t type; const uint8_t *uuid; }gatts_uuid_base_st; /** define GATT service call back info */ typedef struct { uint16_t client_config; // att config 1:notify enable 2:indicate enable uint16_t value_len; ble_gatt_callback_func att_callback_func; uint8_t *value; //read return data when att_callback_func is NULL } ble_gatt_characteristic_cb_info_t; #define GATT_CLIENT_CONFIG_NOTIFY 1 #define GATT_CLIENT_CONFIG_INDICATE 2 /** define group GATT Server profile struct */ typedef struct gatts_profile_list{ void *item; uint16_t profile_start_handle; uint16_t profile_end_handle; const uint8_t *profile_date; uint16_t profile_date_size; }ble_gatts_profile_list_st; typedef struct { uint8_t callsetup; uint8_t callheld; uint8_t call; uint8_t ccwa; } hfp_indicators_status_t; extern uint8_t cfg_bt_work_mode; extern uint8_t cfg_bt_max_acl_link; extern bool cfg_bt_dual_mode; extern bool cfg_bt_tws_mode; extern uint8_t cfg_bt_scan_ctrl_mode; extern bool cfg_bt_simple_pair_mode; extern uint16_t cfg_bt_support_profile; extern uint16_t cfg_bt_support_codec; extern uint8_t cfg_bt_hid_type; extern const uint8_t cfg_bt_spp_rfcomm_server_ch0; extern const uint8_t cfg_bt_spp_rfcomm_server_ch1; extern const uint8_t cfg_bt_spp_rfcomm_server_ch2; extern uint8_t cfg_bt_connect_times; extern uint8_t cfg_bt_pwrup_connect_times; extern uint16_t cfg_bt_sup_to_connect_times; extern uint8_t cfg_bt_rf_def_txpwr; extern uint8_t cfg_bt_page_txpwr; extern uint8_t cfg_bt_inq_txpwr; extern uint8_t cfg_ble_page_txpwr; extern uint8_t cfg_ble_page_rssi_thr; extern uint8_t cfg_ble_rf_delta_gain; extern uint8_t cfg_bt_a2dp_feature; extern uint8_t cfg_bt_a2dp_feature1; extern uint8_t cfg_bt_hfp_feature; extern uint8_t cfg_bt_hfp_feature1; extern uint8_t cfg_bt_tws_pair_mode; extern uint16_t cfg_bt_tws_feat; extern uint8_t cfg_bt_tws_not_auto_connect; extern uint8_t cfg_bt_hci_disc_only_spp; extern uint8_t cfg_bt_hid_douyin_mode; extern uint8_t cfg_bt_hid_android_param; extern const uint16_t link_info_page_size; #if HLW_UI extern uint8_t connect_addr[6]; extern uint16_t cfg_bt_2acl_feature; #endif // HLW_UI #define bt_is_scan_ctrl() cfg_bt_scan_ctrl_mode #define bt_a2dp_is_vol_ctrl() (cfg_bt_a2dp_feature & A2DP_AVRCP_VOL_CTRL) #define bt_hid_is_douyin_type() cfg_bt_hid_douyin_mode #define BT_OPT_AFH_UNKNOW_DIS BIT(0) #define BT_OPT_SCO_ACK_EN BIT(1) extern const uint8_t cfg_bb_bt_opt; //control void bb_run_loop(void); void bt_fcc_init(void); void bt_init(void); //初始化蓝牙变量 int bt_setup(void); //打开蓝牙模块 void bt_off(void); //关闭蓝牙模块 void bt_wakeup(void); //唤醒蓝牙模块 void bt_start_work(uint8_t opcode, uint8_t scan_en); //蓝牙开始工作，opcode: 0=回连, 1=不回连 void bt_send_msg_do(uint msg); //蓝牙控制消息，参数详见bt_msg_t void bt_thread_check_trigger(void); void bt_audio_bypass(void); //蓝牙SBC/SCO通路关闭 void bt_audio_enable(void); //蓝牙SBC/SCO通路使能 void bt_get_stack_local_name(char* name); void bt_set_stack_local_name(const char* name); void bt_set_sco_far_delay(void *buf, uint size, uint delay); void bt_set_scan(uint8_t scan_en); //打开/关闭可被发现和可被连接, bit0=可被发现, bit1=可被连接 uint8_t bt_get_scan(void); //获取设置的可被发现可被连接状态（已连接时设置完不会立即生效，需要等断开连接） void bt_set_scan_force(uint8_t scan_en); //强制打开/关闭可被发现和可被连接, bit0=可被发现, bit1=可被连接 uint8_t bt_get_curr_scan(void); //获取当前可被发现可被连接状态 void bt_connect(void); //蓝牙设备回连, 回连次数在cfg_bt_connect_times配置 void bt_connect_address(void); //蓝牙设备回连地址, 回连地址在bt_get_connect_addr函数设置 void bt_disconnect_address(void); //蓝牙设备断开地址, 断开地址在bt_get_disconnect_addr函数设置 void bt_disconnect(uint reason); //蓝牙设备断开, reason: 0=单独断开（入仓）; 1=断开并同步关机（按键/自动关机）;用户单独调用断开，并不关机reason=0xff void bt_hid_connect(void); //蓝牙HID服务回连 void bt_hid_disconnect(void); //蓝牙HID服务断开 int bt_hid_is_connected(void); bool bt_hid_is_ready_to_discon(void); void bt_set_1to2_en(bool en); //蓝牙开关1拖二功能,连上两台手机时关闭会默认断开不在当前耳机音乐通道的手机，可以用bool bt_set_max_acl_link_hook(void)函数返回true重定义断开方式 //status uint bt_get_disp_status(void); //获取蓝牙的当前显示状态, V060 uint bt_get_status(void); //获取蓝牙的当前状态 uint8_t bt_get_scan(void); //判断当前可被连接可被扫描状态 uint8_t bt_get_curr_scan(void); //获取实时可被连接可被扫描状态 uint bt_get_call_indicate(void); //获取通话的当前状态 uint bt_get_siri_status(void); //获取SIRI当前状态, 0=SIRI已退出, 1=SIRI已唤出 bool bt_is_calling(void); //判断是否正在通话 bool bt_is_playing(void); //判断是否正在播放 bool bt_is_testmode(void); //判断当前蓝牙是否处于测试模式 bool bt_is_sleep(void); //判断蓝牙是否进入休眠状态 bool bt_is_allow_sleep(void); //判断蓝牙是否允许进入休眠状态 bool bt_is_connected(void); //判断蓝牙是否已连接（TWS副耳被连接，或主耳与手机已连接） bool bt_is_ios_device(void); //判断当前播放的是否ios设备 bool bt_is_support_vol_ctrl(void); //判断当前播放的是否支持音量同步 uint32_t bt_sleep_proc(void); void bt_enter_sleep(void); void bt_exit_sleep(void); void bt_updata_local_name(char *bt_name); bool sco_is_connected(void); bool bt_sco_is_msbc(void); //判断当前通话是否是宽带通话 bool sbc_is_bypass(void); bool bt_is_low_latency(void); //判断蓝牙是否在低延时状态 bool bt_is_silence(void); bool bt_decode_is_aac(void); //判断蓝牙解码是否是aac bool bt_decode_is_lhdc(void); //判断蓝牙解码是否是LHDC bool bt_decode_is_ldac(void); //判断蓝牙解码是否是LDAC uint8_t bt_get_connected_num(void); //一拖二获取当前连接了几台设备 uint8_t bt_get_cur_a2dp_media_index(void); //一拖二获取当前播放设备的index u8 bt_call_get_ring_index(void); //一拖二获取当前响铃设备的index u8 bt_get_connect_status(u8 *bd_addr); //获取当前地址设备的连接状态，已连接返回BT_STA_CONNECTED，连接中BT_STA_CONNECTING，未连接BT_STA_DISCONNECTING //info bool bt_get_link_btname(uint8_t index, char *name, uint8_t max_size); //index: 0=link0, 1=link1, 0xff=auto(default link0) bool bt_get_link_btaddr(uint8_t index, u8 *addr); //index: 0=link0, 1=link1, 0xff=auto(default link0) void bt_get_local_bd_addr(u8 *addr); void bt_tws_put_link_info_addr(uint8_t *bd_addr, uint8_t *link_key); void bt_tws_put_link_info_feature(uint8_t *bd_addr, uint8_t feature); void bt_nor_link_ctrl_max_set(u8 max); void bt_nor_put_link_name(uint8_t *bd_addr, char *name); int bt_nor_reorder_for_addr(uint8_t *bd_addr); //将指定地址的连接信息放在链表最前面，回连时将优先回连该地址 //tws api uint8_t bt_tws_get_status(void); //获取tws连接状态 uint8_t bt_tws_get_scan(void); //tws是否已打开可被搜索与连接 void bt_tws_set_scan(uint8_t scan_en); //打开/关闭tws可被搜索与连接, bit0=可被发现, bit1=可被连接 void bt_tws_disconnect(void); //断开tws设备 void bt_tws_connect(void); //回连tws设备，连接成功返回BT_NOTICE_TWS_CONNECTED，连接失败返回BT_NOTICE_TWS_CONNECT_FAIL void bt_tws_search_slave(uint timeout); //搜索tws设备，搜索失败返回BT_NOTICE_TWS_SEARCH_FAIL，搜索成功并建立连接返回BT_NOTICE_TWS_CONNECTED uint bt_tws_get_link_info(uint8_t *bd_addr); //获取tws配对信息，返回值（0=未连接过TWS，0x80=作为master连过副耳，0x81=作为slave连接过主耳），被连地址放在bd_addr void bt_tws_delete_link_info_with_tag(const char *tag, uint32_t ra_addr); //带参数删除tws配对信息，参数会保存在flash，方便追溯 #define bt_tws_delete_link_info() bt_tws_delete_link_info_with_tag("USER", (uint32_t)__builtin_return_address(0)) //删除tws配对信息 void bt_tws_unpair_device(void); //删除tws配对信息并断开 uint8_t bt_tws_user_key(uint keycode); //发送tws自定义按键, 16bit有效; 返回值：0=成功，1=失败，2=缓冲区满 void bt_tws_switch(void); //主从切换，例如通话时切主副MIC bool bt_tws_need_switch(bool calling); //查看是否需要切换 void bt_nor_connect(void); //回连手机 void bt_nor_disconnect(void); //断开手机 bool bt_nor_get_link_info(uint8_t *bd_addr); //获取手机配对信息，bd_addr=NULL时仅查询是否存在回连信息 uint8_t bt_nor_get_link_info_num(void); //获取配对记录中手机的个数 bool bt_nor_get_link_info_addr(uint8_t *bd_addr, uint8_t order); //获取第n个手机配对信息，bd_addr=NULL时仅查询是否存在回连信息 bool bt_nor_get_link_info_name(uint8_t *bd_addr, char *name, uint8_t max_size); //获取配对信息中的蓝牙名 void bt_nor_delete_link_info_by_addr(uint8_t *bd_addr, bool ext); //根据地址删除手机配对信息 void bt_nor_delete_link_info(void); //删除手机配对信息 void bt_nor_unpair_device(void); //删除手机配对信息并断开 u8 bt_tws_get_force_role(void); bool bt_tws_get_first_role(void); bool bt_tws_get_link_rssi(int8_t *buffer, bool left_channel); void bt_tws_report_dgb(void); uint32_t bt_tws_master_clock_get(void); //获取tws master的clock /** * @Desc: Switch the current device MIC as active MIC. * @return: 0-Switch MIC Success, 1-Switch MIC Fail */ u8 bt_tws_switch_mic(void); /** * @Desc: Hold the current device MIC as active MIC, if not, switch to active MIC first * @return: 0-HOLD MIC Success, 1-HOLD MIC Fail */ u8 bt_tws_hold_mic(void); /** * @Desc: Release the permission of the current device MIC as active MIC, * the MIC of other device can become active MIC. */ void bt_tws_release_mic(void); /** * @Desc: Get the device of the active MIC * @return: 0-local device,1-remote device */ u8 bt_tws_get_dev_of_active_mic(void); #define bt_tws_is_connected() (bool)(bt_tws_get_status() & TWS_STA_FLAG) #define bt_tws_is_slave() (bool)(bt_tws_get_status() & TWS_STA_ROLE) #define bt_nor_is_connected() (bool)(bt_tws_get_status() & TWS_STA_NOR_FLAG) #define bt_nor_acl_is_connected() (bool)(bt_tws_get_status() & TWS_STA_NOR_ACL_FLAG) #define bt_tws_is_ms_switch() ((cfg_bt_tws_feat & TWS_FEAT_MS_SWITCH) != 0) #define bt_tws_is_tsco() ((cfg_bt_tws_feat & TWS_FEAT_TSCO) != 0) #define bt_tws_is_name_menu() ((cfg_bt_tws_feat & TWS_FEAT_NAME_MENU) != 0) #define bt_send_msg(ogf, ocf) bt_send_msg_do((ogf<<24) | (ocf)) #define bt_ctrl_msg(msg) bt_send_msg(BT_MSG_CTRL, msg) #define bt_comm_msg(msg, param) bt_send_msg(BT_MSG_COMM, (msg<<16) | (u16)(param)) #define bt_tws_msg(msg, param) bt_send_msg(BT_MSG_TWS, (msg<<16) | (u16)(param)) #define bt_hid_msg(msg, param) bt_send_msg(BT_MSG_HID, (msg<<16) | (u16)(param)) #define bt_pbap_msg(msg, param) bt_send_msg(BT_MSG_PBAP, (msg<<16) | (u16)param) //蓝牙连接 #define bt_scan_enable() bt_set_scan(0x03) //打开扫描 #define bt_scan_disable() bt_set_scan(0x00) //关闭扫描 #define bt_set_scan_param(ps_intv,is_intv) bt_comm_msg(COMM_BT_SET_SCAN_INTV, (ps_intv << 8) | is_intv) //设置scan 参数，0x100*(intv+1) #define bt_abort_reconnect() bt_comm_msg(COMM_BT_ABORT_RECONNECT, 0xffff) //终止回接 #define bt_abort_reconnect_silence(feat) bt_comm_msg(COMM_BT_ABORT_RECONNECT, (u16)feat) //终止回接，没有消息回调。feat:0=手机, BT_FEAT_TWS=TWS //蓝牙音乐 #define bt_music_play() bt_ctrl_msg(BT_CTL_A2DP_PLAY) //播放 #define bt_music_pause() bt_ctrl_msg(BT_CTL_A2DP_PAUSE) //暂停 #define bt_music_play_pause() bt_ctrl_msg(BT_CTL_PLAY_PAUSE) //切换播放/暂停 #define bt_music_stop() bt_ctrl_msg(BT_CTL_A2DP_STOP) //停止 #define bt_music_prev() bt_ctrl_msg(BT_CTL_A2DP_BACKWARD) //上一曲 #define bt_music_next() bt_ctrl_msg(BT_CTL_A2DP_FORWARD) //下一曲 #define bt_music_rewind() bt_ctrl_msg(BT_CTL_A2DP_REWIND) //开始快退 #define bt_music_rewind_end() bt_ctrl_msg(BT_CTL_A2DP_REWIND_END) //结束快退 #define bt_music_fast_forward() bt_ctrl_msg(BT_CTL_A2DP_FAST_FORWARD) //开始快进 #define bt_music_fast_forward_end() bt_ctrl_msg(BT_CTL_A2DP_FAST_FORWARD_END) //结束快进 #define bt_music_vol_change() bt_ctrl_msg(BT_CTL_VOL_CHANGE) //调节音乐音量，之后通过回调函数a2dp_vol_set_cb设置音量 #define bt_music_vol_up() bt_ctrl_msg(BT_CTL_VOL_UP) //音乐加音量，之后通过回调函数a2dp_vol_adj_cb调节音量 #define bt_music_vol_down() bt_ctrl_msg(BT_CTL_VOL_DOWN) //音乐减音量，之后通过回调函数a2dp_vol_adj_cb调节音量 #define bt_music_play_switch() bt_ctrl_msg(BT_CTL_2ACL_PALY_SWITCH) //一拖二切换播放手机 #define bt_low_latency_enable() bt_ctrl_msg(BT_CTL_LOW_LATENCY_EN) //蓝牙使能低延时 #define bt_low_latency_disable() bt_ctrl_msg(BT_CTL_LOW_LATENCY_DIS) //蓝牙关闭低延时 #define bt_fcc_test_start() bt_ctrl_msg(BT_CTL_FCC_TEST) //FCC test模式 //蓝牙通话 #define bt_call_redial_last_number() bt_ctrl_msg(BT_CTL_CALL_REDIAL) //电话回拨（最后一次通话） #define bt_call_answer_incoming() bt_ctrl_msg(BT_CTL_CALL_ANSWER_INCOM) //接听电话，三通时挂起当前通话 #define bt_call_answer_incom_rej_other() bt_ctrl_msg(BT_CTL_CALL_ANSWER_INCOM_REJ_OTHER) //接听电话，三通时挂断当前通话，1拖2时挂断当前的手机通话 #define bt_call_answer_incom_hold_other() bt_ctrl_msg(BT_CTL_CALL_ANSWER_INCOM_HOLD_OTHER) //接听电话，三通时挂起当前通话，1拖2时挂起当前的手机通话 #define bt_call_terminate() bt_ctrl_msg(BT_CTL_CALL_TERMINATE) //挂断电话 #define bt_call_swap() bt_ctrl_msg(BT_CTL_CALL_SWAP) //切换三通电话 #define bt_call_private_switch() bt_ctrl_msg(BT_CTL_CALL_PRIVATE_SWITCH) //切换私密通话 #define bt_call_redial_number() bt_ctrl_msg(BT_CTL_CALL_REDIAL_NUMBER) #define bt_hfp_siri_switch() bt_ctrl_msg(BT_CTL_HFP_SIRI_SW) //开关SIRI, android需要在语音助手中打开“蓝牙耳机按键启动”, ios需要打开siri功能 #define bt_hfp_report_bat() bt_ctrl_msg(BT_CTL_HFP_REPORT_BAT) #define bt_hfp_set_spk_gain() bt_ctrl_msg(BT_CTL_HFP_SPK_GAIN) #define bt_hfp_send_at_cmd() bt_ctrl_msg(BT_CTL_HFP_AT_CMD) #define bt_hfp_send_custom_at_cmd() bt_ctrl_msg(BT_CTL_HFP_CUSTOM_AT_CMD) #define bt_ctl_nr_sta_change() void bt_update_ear_sta(void); //更新耳机入耳状态 void bt_set_ear_sta(bool ear_sta); //设置耳机入耳状态 #define bt_tws_vol_change() #define bt_tws_sync_setting() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_SETTING<<8)) #define bt_tws_sync_led() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_LEDCNT<<8)) #define bt_tws_sync_eq_param() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_EQPARAM<<8)) #define bt_tws_sync_fot_data() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_FOT_DATA<<8)) #define bt_tws_sync_ring_sta() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_RING_STA<<8)) #define bt_tws_sync_custom_data() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_CUSTOM_DATA<<8)) #define bt_tws_sync_dueros_dma_data() bt_tws_msg(TWS_SYNC_INFO, (SYNC_INFO_DUEROS_DMA_DATA<<8)) #define bt_fot_tws_resp() bt_ctrl_msg(BT_CTL_FOT_RESP) //tws alarm enum { ALARM_RES, ALARM_TONE, ALARM_VOL, ALARM_ABP, ALARM_USER, }; #define bt_tws_req_res(param) #define bt_tws_res_add(param) bt_tws_msg(TWS_RES_ADD, param) #define bt_tws_res_done(param) bt_tws_msg(TWS_RES_DONE, param) #define bt_tws_req_alarm(param) bt_tws_msg(TWS_ALARM_REQ, param) #define bt_tws_req_alarm_res(res_idx) bt_tws_req_alarm((ALARM_RES<<12) | (0x0fff & (res_idx))) #define bt_tws_req_alarm_tone(tone_idx) bt_tws_req_alarm((ALARM_TONE<<12) | (0x0fff & (tone_idx))) #define bt_tws_req_alarm_vol(vol, feat) bt_tws_req_alarm((ALARM_VOL<<12) | (0x00ff & (vol)) | ((0x000f & (feat))<<8)) #define bt_tws_req_alarm_abp(mode) bt_tws_req_alarm((ALARM_ABP<<12) | (0x0fff & (mode))) #define bt_tws_req_alarm_user(value) bt_tws_req_alarm((ALARM_USER<<12) | (0x0fff & (value))) //pkt typedef void (*kick_func_t)(void); struct txbuf_tag { uint8_t *ptr; uint16_t len; uint16_t handle; } __attribute__ ((packed)) ; struct txpkt_tag { struct txbuf_tag *buf; uint16_t buf_size; uint8_t total; volatile uint8_t cnt; uint8_t rptr; volatile uint8_t wptr; kick_func_t send_kick; }; typedef struct { uint8_t *rptr; uint8_t *wptr; uint8_t *start; uint8_t *end; volatile uint16_t total; uint16_t trig; } ring_buf_t; uint32_t txpkt_init(struct txpkt_tag *txpkt, void *mem_pool, uint8_t total, uint16_t buf_size); void ring_buf_init(ring_buf_t *pbuf, void *start, uint16_t size, uint16_t trig); bool ring_buf_put(ring_buf_t *pbuf, uint8_t *ptr, uint16_t len); bool ring_buf_get(ring_buf_t *pbuf, void (*callback)(uint8_t *, uint16_t), uint16_t len); bool ring_buf_peek(ring_buf_t *pbuf, void (*callback)(uint8_t *, uint16_t), uint16_t len); //init void hfp_hf_init(void); void a2dp_init(void); void aap_init(void); uint8_t sdp_add_service(void *item); uint bt_get_hfp_feature(void); //a2dp bool a2dp_is_playing_fast(void); uint8_t a2dp_vol_reverse(uint vol); //将系统音量转换为a2dp_vol uint8_t a2dp_vol_conver(uint8_t a2dp_vol); //将a2dp_vol转换为系统音量级数 bool a2dp_is_connect(void); bool a2dp_is_avctp_connect(void); uint8_t a2dp_get_codec_type_by_index(uint8_t index); //根据index获取a2dp解码格式,sbc(0),aac(1),lhdc(2),ldac(3) //hfp bool hfp_is_connected(void); //spp enum { SPP_SERVICE_CH0, //channel0，是默认SPP UUID 服务通路 SPP_SERVICE_CH1, //channel1，自定义UUID,默认用GFPS SPP_SERVICE_CH2, //channel2, 自定义UUID，未使用 }; void spp_init(void); extern struct txpkt_tag spp_tx_ch0; extern struct txpkt_tag spp_tx_ch1; extern struct txpkt_tag spp_tx_ch2; void spp_send_kick(void); int bt_spp_tx(uint8_t ch, uint8_t *packet, uint16_t len); void spp_support_mul_server(uint8_t support); bool spp_is_connect(void); bool spp_is_connected_with_channel(uint8_t ch); //判断某一个SPP通路是否连接，目前只有 0,1,2 共3个通路 void spp_disconnect(void); //voice assistant enum { VA_STA_IDLE = 0, VA_STA_CONNECT, VA_STA_STOP, VA_STA_START, VA_STA_END, }; #define bt_menu_va_stop() bt_comm_msg(COMM_BT_ATT_MSG, BIT(1)) void bt_menu_va_operate(u8 enble); u8 bt_menu_va_is_connected(void); //hid void hid_device_init(void); bool bt_hid_send(void *buf, uint len, bool auto_release); //自定义HID数组 bool bt_hid_send_key(uint type, uint keycode); //标准HID按键 #define bt_hid_key(keycode) bt_hid_send_key(HID_KEYBOARD, keycode) //标准HID键, 如Enter #define bt_hid_consumer(keycode) bt_hid_send_key(HID_CONSUMER, keycode) //自定义HID键, 如VOL+ VOL- #define bt_hid_touch_screen(keycode) bt_hid_send_key(HID_TOUCH_SCREEN, keycode) //触屏 bool bt_hid_touch_screen_set_key(void *ts); #define bt_hid_finger_select_ios() bt_hid_msg(HID_TOUCH_SCREEN, 1) //抖音视频选择IOS系统, 需要在bt连接前调用区分 #define bt_hid_finger_select_andriod() bt_hid_msg(HID_TOUCH_SCREEN, 2) //抖音视频选择andriod系统, 需要在bt连接前调用区分 /** * @brief 模拟触点函数 注意:IOS 范围是-2047-2048 ，安卓是0-4096; IOS设备，x,y是相对位置，比如10,10是相对当前位置移动10,10; 安卓设备，x，y是绝对位置，10,10是在手机10,10的位置上; * @param is_press 1按下，0抬起 * @param x 模拟触点横坐标 * @param y 模拟触点纵坐标 **/ void bt_hid_point_pos(bool is_press, s16 x, s16 y); //pbap #define bt_pbap_connect() bt_pbap_msg(BT_PBAP_CTRL, 1) #define bt_pbap_disconnect() bt_pbap_msg(BT_PBAP_CTRL, 0) #define bt_pbap_select_phonebook(book, sim) bt_pbap_msg(BT_PBAP_SELECT_PHONEBOOK, (sim<<8) | (u8)book) // sim - 1:选择SIM卡，0:本机 // book- 0:pb, 1:fav, 2-ich, 3:och, 4-mch, 5-cch, 6-spd // 若不配置，则选择默认值为本机pb #define bt_pbap_get_phonebook_size() bt_pbap_msg(BT_PBAP_GET_PHONEBOOK_SIZE, 0) #define bt_pbap_pull_phonebook_whole() bt_pbap_msg(BT_PBAP_PULL_PHONEBOOK, 0) #define bt_pbap_pull_phonebook_single(idx) bt_pbap_msg(BT_PBAP_PULL_PHONEBOOK, idx) // 按编号获取联系人信息 // idx不为零，如果为零则直接获取整个电话本信息 void pbap_client_init(void); void map_client_init(void); void goep_client_init(void); //hsp void hsp_hs_init(void); void hsp_hs_init_var(void); void bt_hsp_call_switch(void); //挂断/接听 void bt_hsp_sco_conn(void); //建立HSP SCO连接 void bt_hsp_sco_disconn(void); //断开HSP SCO连接 //latt void latt_send_kick(void); int latt_tx_notify(uint16_t att_handle, const uint8_t * value, uint16_t value_len); void bt_latt_connect(void); void bt_latt_disconnect(void); /***************************************************************************** * BLE连接相关（通道1，与BLE无连接广播相互独立） *****************************************************************************/ struct att_hdl_t { u16 hdl; //att handle u8 cfg; //client config enable u8 res; }; extern struct txpkt_tag notify_tx; extern struct txpkt_tag latt_notify_tx; //Dueros AI #define dueros_ai_speech_start() bt_ctrl_msg(BT_CTL_DUEROS_AI_START) //唤醒小度 #define dueros_ai_speech_stop() bt_ctrl_msg(BT_CTL_DUEROS_AI_STOP) //未支持 #define dueros_dma_key_msg_ctl() bt_ctrl_msg(BT_CTL_DUEROS_DMA_CTL) //同步从机key msg //BLE #define ble_adv_dis() bt_ctrl_msg(BT_CTL_BLE_ADV_DISABLE) #define ble_adv_en() bt_ctrl_msg(BT_CTL_BLE_ADV_ENABLE) #define ble_enable_adv() btstack_ble_adv_en() //蓝牙线程才可直接调用该函数 #define ble_disable_adv() btstack_ble_adv_dis() //蓝牙线程才可直接调用该函数 void btstack_ble_adv_en(void); void btstack_ble_adv_dis(void); void ble_set_adv(u8 chanel, u8 type); void ble_set_adv_interval(u16 interval); bool ble_set_adv_data(const u8 *adv_buf, u32 size); bool ble_set_scan_rsp_data(const u8 *scan_rsp_buf, u32 size); void ble_update_conn_param(u16 interval, u16 latency, u16 timeout); u8 ble_get_status(void); void ble_disconnect(void); bool ble_is_connect(void); bool ble_max_mtu_set(uint16_t max_mtu); void ble_init_att_for_handle(u16 handle, uint8_t *buf, uint16_t len); void ble_send_kick(void); u16 ble_get_gatt_mtu(void); int ble_tx_notify(u16 handle, u8* buf, u8 len); uint8_t ble_set_delta_gain(void); //init gatt //profile_table: profile cache buf //cb_info_table_p: call back info cache void ble_gatts_init(uint8_t *profile_table, uint16_t profile_table_size, ble_gatt_characteristic_cb_info_t **cb_info_table_p, uint16_t gatt_max_att); int ble_gatts_service_add(ble_gatts_service_type service_type, const uint8_t *service_uuid, ble_gatts_uuid_type uuid_type, uint16_t *service_handle); int ble_gatts_characteristic_add( const uint8_t *att_uuid, ble_gatts_uuid_type uuid_type, uint16_t props, uint16_t *att_handle, ble_gatt_characteristic_cb_info_t *cb_info); bool ble_gatt_init_att_info(uint16_t att_handle, ble_gatt_characteristic_cb_info_t *att_cb_info); int ble_gatts_inlcude_service_add(ble_gatts_uuid_type uuid_type, const uint8_t *service_uuid, uint16_t start_handle, uint16_t end_handle, uint16_t *att_handle); int ble_gatts_add_profile_date(ble_gatts_profile_list_st *gatts_profile); int ble_gatts_attribute_add(const uint8_t *att_data, uint16_t *att_handle); bool ble_gatts_profile_mg_alloc_att_num_check(uint8_t att_num); /***************************************************************************** * BLE通道0广播相关（通道0，与BLE连接相互独立） *****************************************************************************/ #define BLE_ADV0_EN_BIT 0x01 #define BLE_ADV0_MS_VAR_BIT 0x02 #define BLE_ADV0_ADDR_PUBIC_BIT 0x04 extern const uint8_t cfg_ble_adv0_en; void ble_adv0_set_intv(u16 intv); //设置广播间隔，单位625us void ble_adv0_set_ctrl(uint opcode); //0=关闭广播, 1=打开广播, 2=更新广播数据（打开时直接广播，关闭时仅更新buffer）, 3=更新scan_rsp数据 uint8_t ble_adv0_get_adv_en(void); void ble_adv0_update_adv(void); void ble_adv0_idx_update(void); /***************************************************************************** * BLE私有连接相关（与BLE连接相互独立） *****************************************************************************/ uint8_t ble_priv_adv_get_adv_en(void); int ble_priv_tx_notify(u16 att_handle, u8* buf, u8 len); void ble_priv_adv_en(u16 opcode); bool ble_priv_is_connect(void); void ble_priv_con_discon(void); #endif //_API_BTSTACK_H